Skip to main content
linie
header-bild

Precision Machines and Systems

Headerbild

Precision Machines and Systems

linie
creative automation AX20-Automatisierungskomponente

AX Systems

System featuring process-optimizable linear motion in various performance classes and configuration options.

Can be used as a C-frame press for operating punch / bend / embossing dies in a modular design, as well as for assembly and testing tasks and similar applications.

Can be used as a slide unit for operating punching/bending dies, assembly dies, welding tongs, etc.

PERFORMANCE CLASSES:

  • AX 10 with up to 10 kN forming force, available as a C-frame or slide unit | -> Download data sheets
  • AX 20 with up to 20 kN forming force, available as a C-frame or slide unit | -> Download data sheets
  • AX 50 with up to 50 kN forming force, available as a C-frame or slide unit | -> Download data sheets
  • AX 100 with up to 100 kN forming force, available as a C-frame or slide unit | -> Download data sheets
  • AX 100V with up to 120 kN forming force, available as a C-frame or slide unit | -> Download data sheets
creative-automation TX40 Stanzautomat

TX – Automatic Punching Machines

Featuring process-optimizable linear motion in two performance classes and various configuration options.

The TX Series automatic punching machines are uncompromisingly designed for process capability. A precision machine for punching, bending, and embossing delicate, complex parts.

The following criteria were taken into account during the development of this machine:

  • Servo-mechanical drive in accordance with current safety regulations; performance level “d” for automatic punching machines; performance level “e” for insert presses
  • Controlled torques due to low moving mass
  • Optimal ram guidance via solid slide guides paired with vibration dampers at the belt level
  • High dynamics due to servo drive; high precision due to a double-symmetrical, positively driven cam drive (two patents)
  • Ultra-fast machine control (Codesys-based), enabling freely programmable recipes for pulsation techniques. Offers integrated capabilities for process force monitoring, die monitoring, double sheet detection, ultra-precise lubrication, etc.
  • System machine frame with options for adding additional axes for transverse and/or downward movements
  • Optional servo roller feed (with servo intermediate lifting) or plier feed with linear axis and optional pneumatic or servo-actuated clamping.

PERFORMANCE CLASSES:

  • TX 40S automatic punching press with up to 40 kN forming force, optionally with an integrated forced ejector (from above) | -> Download Data Sheets
  • X40E insertion press for operation with a light curtain, with up to 40 kN forming force, optionally with an integrated forced ejector (from above) | -> Download Data Sheets

ProX – Modular Machining Center

Our ProX module is an extremely stable and vibration-resistant system base, available in two sizes. Designed as the optimal foundation—manufactured from a composite of steel and polymer concrete—it is intended for mounting our AX100, AX20, and SEM components, as well as either a roller or clamp feed from the EX series.

The ProX100s allows for the installation of up to 2 AX100 units in series. The individual AX100 units can also be operated with phase shifts. Additional systems (AX20 or SEM) for vertical and/or lateral movements can be integrated with the AX100 units.

The ProX100l allows for the installation of up to 4 AX100 units in series. The individual AX100 units can also be operated with a phase shift. Additional systems (AX20 or SEM) for vertical and/or lateral movements can be integrated with the AX100 units.

Both versions can be expanded with additional ProX100 units. Adding an additional feed mechanism creates an automatic punching machine (one axis) or a linear machining center (multiple axes).

With a special parts transfer system, even pre-separated parts can be fed through the machine in cycles. The ProX 100 is currently our most popular machine.

PERFORMANCE CLASSES:

  • ProX 100s, table width 1,000 mm
  • ProX 100l, table width 2,000 mm
creative-automation EX50 Rolleneinzug

EX – Feeders/Material Feeders

An important component of any automated parts manufacturing process is the right material feeder. That is why we have developed feeders with the ideal capabilities for a wide range of possible applications.

Recommended applications: System components for our TX and ProX machines; building blocks for modular system solutions.

The available selection includes the following series:

EX 10P – EX100P (belt widths 10 – 100 mm)

  • Simple pneumatic gripper feeders (cost-optimized for slow-running processes with a fixed feed length, cycle time up to 30 1/min).

EX 63 (web widths 5 – 63 mm)

  • (selectable feed lengths 1 – 50, 1 – 100, 1 – 120, 1 – 350 [mm])
  • Pliers feed units on a linear axis (models up to 350 mm with freely selectable feed length, clamping either pneumatic or servo-driven, cycle time up to 120 cycles per minute). | -> Download Data Sheets

EX 63T (strip widths 5 – 63 mm)

Gripper feeders (pushing and pulling) as a synchronized tandem feed system. This design has proven itself for long processing runs.

It also allows for production with minimal material loss (threading mode: pushing feed; unthreading mode: pulling feed)

EX 100 (strip widths up to 100 mm)

Pliers feed units with positive-drive cam mechanism, available with either an autonomous servo drive or coupled to a central drive (feed length up to 50 mm, cycle time up to 400 1/min) | -> Download Data Sheets

EX 50 (strip widths up to 50 mm)

  • Roller feed with one servo drive each for feed length and freely programmable intermediate clearance (feed length freely selectable, cycle time depending on feed length up to 7,501 rpm) | -> Download Data Sheets

EX 40 (wire diameter 0.5 – 3 mm)

  • Wire feed: roller feed with servo axis, freely programmable feed length.

KEM – Contact Insertion Machine

Machines or system units for processing cut-and-clamp contacts.

Stator cores with enameled copper wire for motor manufacturing, fan technology, and the automotive industry are connected using cut-and-clamp contacts in numerous applications.

Unique Selling Points:

  • Proven system technology (on the market since 1999)
  • Can be integrated into complex production lines or used as a stand-alone system
  • Excellent process capability through force-displacement-controlled insertion of contacts using a servo axis
  • Impact-free separation of contacts using the patented AX system
  • Integration of customer-specific additional functions (bending, testing, marking, measuring, etc.)
  • System supplier for several manufacturers of cut-to-fit contacts
linie

creative automation GmbH & Co. KG | Rehbichler Weg 28 | 87459 Pfronten Germany
t +49 83 63 925 84-0 | e info@creative-automation.de